Kiehl Xon-forte foam cleaner for the food industry

foam cleaner for the food industry

Characteristics
Removes food contamination such as protein, fat, frying and baking residues and their burnt-on encrustations. Surfaces cleaned with Xon-forte on which food is prepared must always be rinsed with drinking water. A safety certificate for use in the food sector is available.

product composition
Non-ionic surfactants < 5%, soap < 5%, water-soluble solvents, alkalis, food coloring (CI47005).
pH value (concentrate): approx. 13.5
pH value (working solution): approx. 13

scope
Can be used on all alkali-resistant surfaces in the kitchen and food sector, such as convection ovens, combi steamers, grills, ovens, hotplates, deep fryers, extractor hoods, wall and floor tiles. Do not use on alkali-sensitive surfaces such as aluminum, anodized aluminum or paint.

Application
Before first use, material compatibility should be checked on an inconspicuous area.

Maintenance cleaning (surface cleaning):
Use Xon-forte pure. Preheat the convection oven, grill, oven, etc. to approx. 30°C, switch off the device, lather the surfaces, leave to work for 5 - 10 minutes, work with a pad, rinse well, rub dry. The spray bottle can be refilled from the 5 liter canister. For automatic dosing, please follow the device manufacturer's instructions and pour the product into the storage container or connect it to the marked dosing hoses. Cleaning then takes place automatically. The use of ARCANDIS®-Splend is recommended for the final rinse cycle. When changing products, the dosing device and the associated dosing hoses must be rinsed thoroughly with water.

wiping/mechanical wet cleaning
0.5 liters to 8 liters of cold water.

Foam cleaning:
Pour pure Xon-forte into the container, select nozzle setting 1:4 to 1:10. Suitable Kiehl application devices:
Art. No. z 20 50 18 Spray bottle 1.5 L, red, PP foam nozzle (seals EPDM)
Art.-No. z 20 50 72 Pressure storage sprayer, 5L, foam nozzle (seals EPDM)

Basic cleaning:
1 liter to 8 liters of cold water. Spread the cleaning solution on the floor, leave to work for about 10 minutes, scrub, vacuum off the dirty water, rinse thoroughly with clean water. Water at a temperature of about 40 - 60 °C accelerates the effectiveness of Xon-forte on solid grease stains. For grease or protein stains, add Xon-forte in the appropriate application concentration (cold) and when scrubbing the floors, apply hot water to the floor surface via the machine's lye tank. Surfaces that come into direct contact with food must be rinsed with drinking water (8 liters per m²) after cleaning. No liability can be accepted for incorrect or unprofessional use and any damage resulting from this.

notes
Ecolabel registration number: DE/020/215
Correct dosage saves costs and protects the environment. Further information about the EU Ecolabel can be found on the Internet at www.ecolabel.eu. Surfactants are made from plant-based raw materials. Packaging material is recyclable.

Special Information
GHS 05, Danger (in concentrate);
H314 Causes severe burns and eye damage. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P308/313 IF Exposure or if concerned: Get medical advice/attention. Contains: Potassium Hydroxide (INCI).

Not a consumer product according to 1999/44/EC Art.1!