Kiehl Dopomat SNF industrial cleaner

industrial cleaners

Characteristics
Quickly removes general as well as oily/greasy dirt that accumulates in assembly halls or workshops in the automotive and metal industry. Optimal surface wetting and non-foaming when used manually and mechanically. The dirt-carrying properties of the cleaning solution are only active for a short time, which means that it separates well. Dopomat SNF is free of phosphate, chlorine, complexing agents and silicone and is therefore environmentally friendly. Suitable for oil separators according to ÖNORM B 5105, Section 7.2.

Product composition (according to 648/2004/EC)
Non-ionic surfactants 5-15%, soap < 5%, polycarboxylates < 5%, water-soluble solvents, fragrances.
pH value (concentrate): approx. 12
pH value (working solution): approx. 10

scope
Can be used on all water and alkali-resistant industrial floors such as concrete, cement screed, hard-fired clay bricks, "Cotto" clay tiles, stoneware tiles, epoxy resin and asphalt slabs. Do not use on linoleum or rubber!

Application
Before initial cleaning, the material resistance must be checked in an inconspicuous place.

Maintenance cleaning (wiping/mechanical wet cleaning):
Depending on the level of dirt, add 100 – 200 ml to 10 liters of cold water.

Intensive cleaning:
Depending on the level of dirt, add 200 – 500 ml to 10 liters of cold water. Spread the cleaning solution, scrub, vacuum and rinse with clean water.

Notice
No liability can be accepted for improper or unprofessional use and any resulting damage.

Special Information
GHS 07, Warning (in concentrate); H315 Causes skin irritation. H319 Causes serious eye irritation. P280 Wear protective gloves/eye protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

Not a consumer product according to 1999/44/EC Art. 1!