Description
Description
basic cleaner for porcelain stoneware tiles
Characteristics
Deeply effective, highly alkaline basic cleaner for microporous floor tiles. Due to the special effectiveness and high dirt-carrying capacity, the dirt adhering to the pores is penetrated by the cleaning solution and washed out with the scrubbing process.
Product composition (according to 648/2004/EC)
Anionic surfactants 5–15%, non-ionic surfactants < 5%, dyes, fragrances. pH value (concentrate): approx. 13, pH value (working solution): approx. 11
scope
For basic cleaning of all alkali- and water-resistant tiled floors with smooth, rough or microporous surfaces, e.g. porcelain stoneware tiles, safety tiles in indoor and outdoor areas. Not suitable for linoleum, rubber, calcareous natural and artificial stone floors such as marble! Protect adjacent floor areas!
Application
Basic cleaning (single-disk machine/scrubber dryer): Depending on the level of dirt, add 100 – 800 ml to 8 litres of cold water.
Spread the cleaning solution over the floor surface and scrub after a short exposure time. Rinse the cleaned floor surface thoroughly with clean water. If too much foam is formed in the waste water tank, use a defoamer.
Notice
The product contains natural raw materials - colour variations cannot therefore be ruled out.
No liability can be accepted for improper or unprofessional use and any resulting damage. Special information GHS 05, Danger (in concentrate); H314 Causes severe skin burns and eye damage. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P308/313 IF exposed or concerned: Get medical advice/attention. Contains: Isopropanolamine (INCI).
Not a consumer product according to 1999/44/EC Art. 1!
Specifications
Specifications
-
Manufacturer number
Pflichthinweise
Pflichthinweise
payment options
SSL encrypted. Your payment will be processed securely.