How do I remove annoying residue from stickers or tint films?
Who hasn't experienced this? The annoying adhesive residue from stickers or tinting films often remains and is practically insoluble. Every remedy is tried, but nothing gets better. Don't despair, we have a few tips here to magically remove this annoying adhesive residue.
Tip No. 1: The hairdryer
Take a hairdryer or hot air dryer and warm up the area in question. The adhesive layers are now warm and can be removed very easily. If you have a scraper to hand, you can use it to carefully scrape the residue off the glass. This method is particularly suitable for sensitive or already damaged stickers.
Tip No. 2: Liquid adhesive remover
A solution can also be found with a liquid adhesive remover . This is not only suitable for stickers and tint films, but also for the adhesive residue. Apply the remover to the area to be removed using a cloth or brush and allow it to work for 5-10 minutes. The adhesive residue can now be carefully scraped off using a plastic spatula. If you have a particularly stubborn area, you can use a plastic film to cover the area. This will make the remover more effective.
Tip No. 3: The glass scraper
The last but very useful tip is the glass scraper with rust-proof stainless steel blades . It is suitable for everyday use on glass. It removes stickers, tinting films, tape and even mortar and paint splashes. If the blade is blunt, damaged or dirty, it can easily be replaced with replacement blades. Remember to always scrape in one direction to avoid scratches.
Well, after these helpful tips, you will no longer have any trouble getting rid of stickers, colored foils or adhesive residue. In our shop you can get both the glass scraper and the liquid adhesive remover! Good luck!
